FR4 / G10 CNC Machining — Custom Insulation Parts, Built to Your Drawing

We machine FR4 and G10 epoxy glass laminate into precision insulation parts for OEMs across North America, Europe, and Japan. Send a drawing, get a real quote — not a form letter.

Product Overview

FR4 and G10 are close cousins — both are epoxy resin sheets reinforced with woven fiberglass, both machine the same way, and both end up doing the same job: keeping electricity where it’s supposed to be. The difference comes down to one additive. FR4 has a flame-retardant filler built in (that’s the “FR” — flame retardant). G10 doesn’t. Everything else — the strength, the machinability, the price range — lines up close enough that most engineers pick based on whether their spec calls for UL94 V-0 flame retardancy or not.

We cut both materials into finished parts every week: control panel insulators, PCB test fixtures, motor spacers, switchgear components — whatever your drawing calls for. If you’re not sure which grade fits your application, tell us your voltage class and operating environment and we’ll tell you straight which one to use.

Key Features

  • Strong enough to skip the metal bracket: Rigid, impact-resistant, holds tight tolerances even in thin-wall sections.
  • Insulates in both dry and humid conditions: High dielectric strength that doesn’t fall off when humidity climbs.
  • Rated for continuous duty up to 150°C: Doesn’t soften, warp, or lose insulating properties under sustained heat.
  • Shrugs off moisture and mild chemical exposure: A common choice for equipment that lives outdoors or near coolant.
  • Machines cleanly: Mills, drills, taps, and cuts without the delamination issues you get from cheaper laminates.
  • RoHS and REACH compliant: Documentation ships with every order, no extra paperwork chase on your end.

Every part we ship is CNC-machined in-house to ±0.05–0.1 mm, whether it’s a one-off prototype or a 5,000-piece production run.

FR4 and G10 Epoxy Glass Fiber Laminate

Typical Applications

FR4/G10 shows up anywhere electrical current and mechanical stress overlap. On the electrical side, that means motor and transformer insulation, PCB support plates, switchgear components, busbar insulators, and terminal boards. On the mechanical side, we regularly machine it into brackets, jigs, and structural spacers for automation lines — anywhere a part needs to hold its shape under vibration or load without conducting electricity.

A few real-world examples from parts we’ve cut:

G10 Knife Handle Material
G10 Knife Handle Material
self adhensive epoxy insulation gasket
Self-Adhesive Epoxy Insulation Gasket
Surfboard Fins
Surfboard Fins
Planet Gears
Planet Gears
heat dissipation designs
Heat Dissipation Designs
mold insulation plate
Mold Insulation Plate
Fr4 insulator constructural component
Fr4 Insulator Constructural Component
FR4 material double sided PCB
FR4 Material Double Sided PCB

CNC Machining Capabilities

Our shop runs CNC milling, drilling, tapping, countersinking, and contour cutting on FR4/G10 sheet stock every day — this isn’t a side material for us. Standard tolerance is ±0.05–0.1 mm; tighter tolerances are available depending on part geometry and wall thickness.

Send us a DWG, STEP, or PDF and we’ll turn around a quote within 24 hours. We run everything from single prototypes to full production batches on the same line, so scaling up after a successful sample doesn’t mean starting over with a new supplier.

CNC Machining of FR4 and G10 Materials

Technical Data Sheet

Here’s what you’re actually buying — the numbers that matter when you’re speccing FR4/G10 into a design:

PropertyUnitFR4 / G10
Densityg/cm³1.8–2.0
Max Working Temp°C130–150
Dielectric StrengthkV/mm≥20
Tensile StrengthMPa≥350
Flexural StrengthMPa≥400
Water Absorption%≤0.2
Flame Retardant Rating—UL94-V0
Color—Green / Yellow / Black
Standard Sizemm1020×1220 / Custom

Types of FR4/G10

Not all FR4/G10 is the same grade. Here’s how the common variants break down:

TypeDescriptionTemperature (°C)Typical Use
FR4 Standard GradeElectrical-grade epoxy glass laminate with UL94 V-0 flame retardancy130–150General electrical insulation, control panels
G10 Standard GradNon-flame-retardant version with excellent mechanical strength and rigidity120–140Mechanical fixtures, structural components
FR4 High-TG (High Glass Transition)Special formulation with an elevated glass transition temperature for extended thermal stability150–180High-temperature applications, power electronics
FR4 AntistaModified surface resistivity to reduce electrostatic buildup130–150Semiconductor tools, electronics assembly fixtures
FR4 Black / Yellow / NaturaColor-customized laminates with the same mechanical performance, for easy visual identification130–150Decorative panels, machined identification parts
FR4 / G10 Tubes & RodsCylindrical stock machined from the same epoxy glass laminate for turned components130–150Transformer bobbins, insulating shafts, spacers

FAQs

Q1: Do you take small orders, or do I need a minimum quantity?

No minimum. We’ll run a single prototype for testing, then scale to production once you’re happy with the fit. A lot of our customers start with one part before committing to a batch.

Flame retardancy, mostly. FR4 has a UL94 V-0 flame-retardant additive built into the resin; G10 doesn’t. Mechanically they’re nearly identical, so if your application doesn’t have a flammability requirement, G10 is a perfectly good — sometimes cheaper — choice. If you’re insulating anything near live current, go with FR4.

Custom shapes are most of what we do — spacers, covers, mounting plates, whatever your drawing shows. We hold ±0.05 mm on request.

Continuous duty tops out around 130–150°C. Push it higher for extended periods and you’ll start losing mechanical strength and insulation performance — that’s when we’d point you toward G11 instead, which is rated for 200°C.

 

It comes standard with every shipment. No extra request needed.

 

Both. Cut-to-size blanks if that’s all you need, or fully machined, ready-to-install parts if you’d rather skip an extra step on your end.

 

FR4, in most cases — the flame retardancy is usually a spec requirement in electronics testing environments, and the added cost over G10 is minor. If your fixture spec doesn’t call out flammability rating, G10 works fine and can save a little on material cost at volume.

Here. We quote and machine from a single piece up, with drawing turnaround inside 24 hours. If you’ve got a DWG, STEP, or even a PDF sketch, send it over and we’ll tell you what it costs and when it ships.

Related Reading

Dry Cutting vs. Wet Cutting

When Wet Cutting Is Required for Epoxy Glass (FR4, G10, and G11)

Wet cutting is typically necessary when machining epoxy resin glass laminates like FR4, G10, and G11, because of the abrasive ...
/
FR4 G10 G11 and mica sheets

How to Store FR4, G10, G11, and Mica Properly

The long-term stability of FR4, G10, G11, and mica sheets can be achieved through proper storage and by avoiding moisture-related ...
/
G7 vs FR4/G10 electrical insulation materials comparison for high-temperature applications

G7 Silicone Laminate vs FR4/G10: When Do You Need Silicone Insulation?

Most engineers don't think about G7 silicone laminate vs FR4 until an FR4 part starts failing in a spot that runs hotter ...
/

Need a simpler industrial high-temperature insulation solution? We're the experts!